I-5020e

Overview | Download Brochure

Our advanced Features:
Combining 1394b+USB+eSATA host with SATAII drive channels to offer outstanding performance, the I-5020e is totally OS independent, meaning no OS drivers and potential conflicts.

I-5020e Features an advanced RISC processor capable of performing RAID Levels 0, 1, 3, 5, 6,0+1. Enhanced hardware XOR engine coupled with high speed error correcting cache delivers excellent throughput even under the heaviest of loads.

- User Guide
- Fimwave Upgrade
- Contact Us ~System Architecture:
- Intel FW80219 400MHz I / O
- 256MB on-board DDR200 SDRAM with ECC
- 5 channels SATA II controller
- Support extreme performance RAID6 function
- NVRAM for RAID configuration & transaction log
- Write-through or write-back cache support

~RAID Features:
- RAID level 0 , 1 , 1+0 , 3 , 5 , 6 and JBOD
- Multiple RAID selection
- Online Array roaming
- Online RAID level / stripe size migration
- Online RAID capacity expansion and RAID level migration simultaneously
- Online Dynamic Volume set capacity expansion
- Automatically insertion / removal detection and rebuild
- Greater than 2TB per volume set
- Instant availability and background initialization
- Support S.M.A.R.T NCQ, and OOB staggered spin-up capable drives

~Disk Bus Interface:
- SATA II Compatible -3.0 Gbps ( 300MB / Sec )

~Host Connectivity:
- e-SATA

~Monitors / Indicators:
- Push Buttons and LCD Display Panel for setup and configuration
- 5 drive LED indicators and 3 environment LED indicators
- Environment and drive failure indication through LCD,LED and alarm buzzer

~Power Supply:
- 220w PFC ( AC100~130 or 220~264V)

~Dimension & Weight:
- 9.47” H x 8.35” W x 12.8” D / 240mm (H) x 212mm (W) x 325mm (D)
- 17.92Lbs / 8.0Kgs (Without H.D.D.)

back to top