ARAID 2000

Overview | Download Brochure

Your best Non-stop SATA disk array companion (Hard disk Interface: SATA)

Features:

> PC Host Interface: SATA

> Hard disk Interface: ARAID 2000: SATA

> RAID Level: RAID 1(disk mirror) or RAID 0(disk stripe), User Selectable.

> Requires No Driver: Yes

> Requires No Add-on Card: Yes

> Failed HDD Hot-Swap & New HDD Auto-Rebuild: Yes, allows user to replace hard disk while
   PC is operating

> NEW Mirror-On-Demand: Manual Disk Rebuild. Standby hard disk provides anti-virus and file
   mishandling recovery

> Standard HDD Format: Yes, fully complies to standard disk format. Also serves as an on-line
   Hard Disk copier.

> LCD screen: Yes, indicates system and hard disk, fan and temperature status

> LED indicator: Yes, shows system and disk READ or WRITE status

> Hard Disk Fail Alert:Yes, LCD, LED, Buzzer, e-mail and SNMP Trap Notification.

> O.S. Supported: Windows 2003, 2000, XP, ME, 98, 95, 3.11, DOS 6.22, LINUX, SCO UNIX,
   Free BSD, NetWare, Solaris, IBM OS/2, Mac OS.

> Built-in Powerful Fan: Yes, 70mm, Support for 10,000/7200/5400rpm HDD

> Space Required: Two free 5.25¡¨ drive bays

> Connector: SATA x1, +5/+12V Power Connector x1. EIDE x1 (for firmware upgrade only)

> Bad Sector Recovering: Yes, Recoverable disk bad sectors can be detected and recovered
   on the fly

> Simple Management: Yes, Provides AraidEye for Windows (bundled) or Linux (optional).

> SNMP Management (optional): Yes, Provides SNMP Agent for Windows or Linux. Includes
   Enterprise MIB, MIB II, Traps.